These Rotax OTK kart chassis clips integrate a hole for standard 8mm fuel pipe and a secure location to attach your wiring loom.
Suitable for kart chassis tubes with a diameter of 30mm. The clip is designed to be secured to the chassis with a 4.8mm cable tie and the wiring loom secured to the clip with a 3.6mm cable tie. Cable ties are not included.
Please note - If the end of your fuel pipe has stretched in diameter you may find it a very tight fit through the clip hole, if you pinch the end of the pipe you should be able to still push it through the clip.
This product design is registered, certificated and authorised by the Intellectual Property Office(IPO)
